Component seal

STRUCTURE DESCRIPTION Replacement of Burgmann M37, conical spring design. Operating range: Temperature: -20--180℃ Speed: 15m/s. Pressure: 10bar Standard size: 10-80mm Material: Seal ring: Stainless steel,Car, Sic, Ssic, TC. Secondary seal: NBR, EPDM, Viton etc. Spring and metal parts: 304, 316, HAST.C

STRUCTURE DESCRIPTION Replacement of Burgmann M7N, wave spring design.KL-M7N is a popular mechanical seal,can be used in general conditions.Seal faces are easy to be changed,permitting all combinations of materials. Pump screw design could be made for spring retainer. Operating range: Temperature: -20--180℃ Speed: 15m/s Pressure: 12bar Standard size: [...]

STRUCTURE DESCRIPTION Replacement of Burgmann M3N, conical spring design. Features: Conical spring,O-ring pusher construction unbalanced wide choice of seal material Dependent on rotate direction Operating range: Temperature: -20--180℃ Speed: 15m/s. Pressure: 10bar Standard size: 10-80mm Material: Seal ring: Stainless steel, Car, Sic, Ssic, TC. Secondary seal: NBR, EPDM, Viton [...]

STRUCTURE DESCRIPTION Replacement of Burgmann HJ92N, wave spring design.Mechanical seals of the HJ92N series can be used for media containing, solids or with high viscosity industry. The springs are product protected,no sticking or clogging.The seal is independent of direction of rotation. Operating range: Temperature: -20--180℃ Speed: 15m/s. Pressure: 25bar [...]

STRUCTURE DESCRIPTION Replacement of Burgmann H74-D, wave spring design. Multiple spring design is also available! Pump screw design could be made for spring retainer.   Operating range: Temperature: -20--180℃ Speed: 15m/s. Pressure: 25bar Standard size: 14-100mm   Material: Seal ring: Car, Sic, Ssic, TC. Secondary seal: NBR, EPDM, [...]

STRUCTURE DESCRIPTION Replacement of Burgmann H7N, wave spring design. Multiple spring design is also available! Pump screw design could be made for spring retainer. Features: Balanced,wave spring design For stepped shaft Comply with DIN 24960 and EN 12756 Independent on direction of rotation Operating range: Temperature: -20--180℃ Speed: [...]

STRUCTURE DESCRIPTION Replacement of Burgmann Type 560D, rubber bellow design. Operating range: Temperature: -20--150℃ Speed: 10m/s. Pressure: 10bar Standard size: 12-60mm Material: Seal ring: Car, Sic, Ssic, Ceramic, TC Secondary seal: NBR, EPDM, Viton etc. Spring and metal parts: 304, 316, HAST.C

STRUCTURE DESCRIPTION Replacement of Burgmann Type 560, rubber bellow design. Operating range: Temperature: -20--120℃ Speed: 15m/s. Pressure: 10bar Standard size: 8-50mm;0.375”-2.000” Material: Seal ring: Car, Sic, Ssic, Ceramic, TC Secondary seal: NBR, EPDM, Viton etc. Spring and metal parts: 304, 316, HAST.C

STRUCTURE DESCRIPTION Replacement of John Crane Type 502, rubber bellow design.This type is a full convolution elastomeric bellows seal, designed for limited gland depths and confined spaces. Features: fast installation Self-aligning feature make up for excessive shaft end play and run-out Non-clogging, single coil spring design won't be [...]

STRUCTURE DESCRIPTION Replacement of John Crane Type 2100, rubber bellow design. Type 2100 mechanical seal is a compact, unitized, single-spring elastomer bellows seal,it is often found in water-based applications,and widely used in centrifugal,compressors, chillers and other equipment... Features: Easy to install and replace Bellows design is pressure-supported Available [...]